· 8 min read

FiveM and CS2 Server Hosting: Low Ping and DDoS Protection

FiveM and CS2 server hosting comes down to three decisions: where the server sits relative to your players, how much single-core CPU you give it, and how you handle UDP floods. Get the location and CPU right and the server feels smooth. Get the DDoS layer right and it stays online when someone targets it.

This guide covers each decision with concrete checks and config you can use on a VDS or dedicated server.

Why game servers are different from web servers

Both games rely on UDP for gameplay traffic. UDP has no handshake, so source addresses are trivially spoofed and a server cannot tell a flood from players without inspecting traffic. Both games are also sensitive to jitter and CPU stalls, not just raw bandwidth.

FiveM (FXServer) CS2 dedicated server
Default game port 30120 UDP and TCP 27015 UDP (TCP for RCON)
Admin interface txAdmin, 40120 TCP RCON on the game port, optional GOTV on 27020 UDP
Main bottleneck Server main thread, scripts, database One fast core per instance
Scales with Script quality, player count, OneSync entities Tick rate, player count, plugins

Check the current documentation for each game before you open ports, because defaults can change between versions.

Step 1: Choose the location for low ping

Latency is mostly physics. Light in fiber covers roughly 100 km per millisecond of round trip, and real routes are longer than straight lines. Extra hops and poor peering add more. A server in the wrong region can add tens of milliseconds for every player, and that is something no CPU upgrade fixes.

If most of your players are in Turkey or nearby, a Turkey location server in İzmir keeps the path short. If your community is mostly in Western or Central Europe, a Frankfurt-connected location is usually the better fit. If it is mostly on the US West Coast, Fremont is closer. Nixcon operates its own network (AS40368) with its main data center in İzmir and POPs in Frankfurt and Fremont, so you can match the location to your player base. For a broader look at this choice, see our article on when to choose a Turkey location server.

Measure before you commit

Don't guess. Ask a handful of players from different ISPs to run a path test to a candidate IP and send you the output:

# Linux/macOS
mtr -rwzc 100 192.0.2.10

# Windows
pathping -n 192.0.2.10

Look at three things:

You can also use the public looking glass at https://lg.nixconllc.com/ to run ping, traceroute, and BGP route queries from Nixcon's İzmir, Frankfurt, and US locations. That shows the return path from our side, which is the half you can't see from a player's machine.

Step 2: Size CPU, RAM, and disk

Game servers usually need fewer cores than people expect, but those cores need to be fast. The numbers below are starting points based on common practice, not guarantees. Your scripts, plugins, and map choices change everything.

FiveM

CS2

VDS or dedicated?

A VDS is a good fit for one or a few servers, test environments, and communities that are still growing. Because VMware vSphere VDS plans share physical hosts, check that CPU resources are not heavily oversold. A dedicated server makes sense when you run many CS2 instances or a large FiveM community and want predictable single-thread performance. See the BGP-enabled VDS options and our dedicated servers.

Step 3: Understand the UDP attacks you will face

Game servers get attacked by competitors, by disgruntled players, and by people testing stress services. Common patterns:

For a general overview, see our post on DDoS attack types and symptoms.

Step 4: Harden the host firewall

A host firewall cannot stop a volumetric flood that fills your uplink. It does stop the cheap, low-volume abuse and keeps admin ports private. This is an nftables example for a CS2 server with SSH limited to an admin address (documentation IP shown):

table inet gamefw {
  chain input {
    type filter hook input priority 0; policy drop;

    iif "lo" accept
    ct state established,related accept
    ct state invalid drop

    # SSH only from your admin IP or VPN
    ip saddr 203.0.113.50 tcp dport 22 accept

    # CS2 game port: per-source packet-rate limit
    udp dport 27015 meter cs2_pps { ip saddr limit rate over 400/second burst 800 packets } drop
    udp dport 27015 accept
    tcp dport 27015 ip saddr 203.0.113.50 accept   # RCON, admin only

    # ICMP, limited
    icmp type echo-request limit rate 5/second accept
  }
}

Save it as /etc/nftables.conf and load it with nft -c -f /etc/nftables.conf (syntax check first), then nft -f /etc/nftables.conf. Keep an out-of-band console open while you test so a bad rule doesn't lock you out.

For FiveM, the same idea applies to port 30120 (UDP and TCP). Never expose txAdmin (40120) to the internet. Allow it only from your admin IP, or reach it through a VPN such as WireGuard.

Tuning notes

Step 5: Add upstream DDoS protection

Anything that arrives at your server's port has already used your bandwidth. Real mitigation has to happen upstream, before traffic reaches your VM. When you evaluate a provider, ask:

Nixcon's DDoS protection and firewall service filters traffic on our own network. If you run a larger operation, NixMon provides flow-based monitoring and DDoS detection, so you can see whether a lag spike came from an attack or from a script on your server. If you operate your own ASN and IP block, NixGuard Edge delivers clean traffic through a GRE tunnel with a BGP session.

Common mistakes and fixes

Quick checklist

  1. Collect path tests from real players to your candidate location.
  2. Pick high single-core performance over high core counts.
  3. Put the database and OS on NVMe with enough RAM.
  4. Allow only game ports publicly. Lock down admin ports.
  5. Add per-source rate limits after measuring baseline.
  6. Use upstream DDoS filtering and flow visibility for volumetric attacks.
  7. Test restores of your configs and database.

Frequently asked questions

What is the best location for a FiveM or CS2 server?

The one closest to most of your players by network path, not just by map distance. Collect mtr or pathping results from players on different ISPs to candidate IPs and compare average RTT, packet loss, and jitter. For players in Turkey and nearby, a Turkey location server in İzmir is a natural candidate.

How much RAM does a FiveM server need?

As a starting point, 8 GB works for a small server and 16 GB or more for larger roleplay servers with many resources, plus extra if the database runs on the same machine. Actual needs depend on your scripts, so monitor usage and use resmon to find heavy resources.

Can a firewall alone stop UDP DDoS attacks on a game server?

No. A host firewall handles low-volume abuse and keeps admin ports private, but a volumetric flood can saturate your link before packets reach the firewall. You need filtering upstream, on the provider's network, for larger attacks.

Which ports do FiveM and CS2 servers use by default?

FiveM uses 30120 on UDP and TCP, and txAdmin uses 40120 on TCP. CS2 uses 27015 on UDP, with TCP on the same port for RCON. Check the current documentation, since defaults can change, and don't expose admin ports publicly.

Run your game server on a low-latency VDS with DDoS filtering.Learn more